You can not miss our fashion blogs

Dear Friend,
In this article you are going to learn how to properly tie-a-tie. You will also learn the four types of knots you can create when aiming for a professional look or appearance.
If there is one thing you must know aside from learning how to tie a nice looking know, it’s knowing how important it is to look like an executive. When you carry yourself on a corporate level, people tend to respect you as a corporate leader.
There are many ways you can tie-a-tie, but if you don’t do it the right way, it may not look neat, drawing the attention away from your professional appeal.
Before educating you on how to develop a proper necktie knot, you must know the four types of knots that exist.
· Knot #1: Four In-Hand Knot
· Knot #2: Pratt Knot
· Knot #3: Half Windsor Knot
· Knot #4: Windsor Knot
Now that you have a basic understanding of how many knots you can tie, and the types of knots there are, you must know a brief definition of each one.
· Four In-Hand Knot – A dissymmetric tie that is knotted for button down dress shirts.
· Pratt Knot – A snug, wide based tie knot specified for a variety of dress shirts.
· Half Windsor Knot – A well-proportioned tie knot designed to fit any form of a dress shirt. · Windsor Knot – A wide and triangulated tie know that is good for spread collar shirts.
When you are about ready to tie your necktie, be sure that you are standing directly in front of a mirror so you can see yourself going through the steps. When you get really good at tying a knot, then you could by-pass the mirror and do it freely.
For your review, follow the step-by-step directions below and use the best visible mirror to achieve your goal.
The Four In-Hand Knot Consists of 7 Quick and Easy Steps:
Step #1: Begin with the wide end of your tie on the right and extend it approximately 10-12 inches below the narrow end on the left.
Step #2: Cross the wide end over the narrow end of your tie.
Step #3: Turn the wide end back underneath the narrow end of your tie.
Step #4: Proceed with bringing the wide end of your tie back over in front of the narrow end again.
Step #5: Next, pull the wide end up through the loop around your neck.
Step #6: Hold the front of the knot loosely with your index finger and bring the wide end down through the front loop.
Step #7: Finally, remove your finger and tighten the know carefully to the collar by holding the narrow end and sliding the knot up gently.
You got it! You now have learned how to properly tie a Four In-Hand Knot. The more you practice, the better you will get at tying a necktie.
The Pratt Knot Consists of 7 Basic Steps:
Step #1: Begin with the wide end of your tie on the right and extend it approximately 10-12 inches below the narrow end.
Step #2: Next, cross the wide part of your tie under the narrow end of your tie.
Step #3: Put the wide end of your tie around and under the narrow end.
Step #4: Pull the loop down and secure it.
Step #5: Take the wide section of your tie and bring it over to the right.
Step #6: Pull the wide end up behind the loop.
Step #7: At last, bring the width of your tie through the knot and secure it softly.
The Half Windsor Knot Consists of 9 Simple Steps:
Step #1: Begin with the wide part of your tie on the right and extend it approximately 10-12 inches below the narrow end.
Step #2: Next, cross the wide end of your tie over the narrow end of your tie.
Step #3: Take the wide section around and behind the narrow end of your tie.
Step #4: Bring the wide area of your tie up.
Step #5: Stretch the wide area of your tie through the loop and to the right.
Step #6: Bring the wide end of your tie to the front; place it over the narrow end of your tie from right to left.
Step #7: Once more bring the wide side of your tie up and through the loop.
Step #8: Now, bring the wide part of your tie down through the knot in front.
Step #9: Carefully with both your hands, secure the knot tightly and raise it up to the collar of your dress shirt.
The Windsor Knot Consists of 9 Straightforward Steps:
Step #1: Begin with the wide end of your tie on the right and extend it approximately 10-12 inches below the narrow end.
Step #2: Next, cross the wide area of your tie over the narrow end of your tie.
Step #3: Take the wide end around and behind the narrow end of your tie.
Step #4: Bring the wide portion of your tie back down.
Step #5: Neatly pull the wide end underneath the narrow end and to the right, back through the loop and then to the right one more time until you see the wide end of your tie is inside out.
Step #6: Bring the wide portion of your tie across to the front; from right to left.
Step #7: Once more bring the wide end up and through the loop.
Step #8: Now, bring the wide part of your tie down through the knot in front.
Step #9: Carefully with both your hands, secure the knot tightly and raise it up to the collar of your dress shirt.
Congratulations! You have now learned how to properly tie-a-tie professionally in four different variations. You will now look like a corporate executive officer.
Keep practicing the variety of knot tying until it become second nature. You will have mastered the art of tying a necktie faster than you thought possible.
Joseph Schwartz is the content developer for As a publisher, educating consumers with the right details is imperative. In order to make the right product decisions, the right information must be supplied. For more information, and to see the section of Versace ties, please go and visit JoyLot’s Versace Neck Ties.